EAGLE POINT AND AUTO CAD

HINTS:

THE YELLOW QUESTION MARK ON THE TOP LEFT SIDE OF ANY DIALOG BOX IS A HELP FILE FOR EAGLE POINT OR HIT THE F1 KEY.

TO ADD OR REMOVE TOOLBAR, RIGHT CLICK ON TOOLS IN THE MENU AND CLICK ON CUSTOMIZE. CHECK OFF THE ONE YOU WISH TO HAVE ON THE SCREEN.

USE THE ESCAPE KEY TO BACK OUT OF A TOOLBAR COMMAND.

TO GET RID OF THE INTERNET BOX CLICK THE SMALL RED BOX IN THE TOP LEFT CORNER

AND CLICK CLOSE.

TO DELETE A FILE, USE THE EAGLE POINT OPEN DIALOG BOX ( DIALOG BOX THAT FIRST

COMES UP WHEN YOU OPEN EAGLE POINT) SELECT THE X ICON AT THE BOTTOM OF THE

BOX, CHECK REMOVE FROM LISTING AND DRIVE, CLICK APPLY, CLICK DELETE.

TO START A NEW FILE AND LIST THE SURVEYS POINTS

1. DOUBLE CLICK THE EAGLE POINT ICON OR CHOOSE THE START BUTTON, PROGRAMS AND EAGLE POINT

2. CLICK ON CREATE NEW PROJECT/ SUB PROJECT ICON ON THE OPEN DIALOG BOX. THIS ICON IS LOCATED IN THE BOTTOM LEFT HAND CORNER.

3. IN THE NEW DIALOG BOX, VERIFY THAT EAGLE POINT PROJECT IS HILIGHTED, CLICK ON THE NEXT BUTTON.

4. A NEW PROJECT DIALOG BOX COMES UP. ENTER A PROJECT DESCRIPTION AND PRESS TAB KEY. THIS COULD JUST BE A JOB NUMBER OR A NAME AND DESCRIPTION.

5. NOW YOU WILL WANT TO SUPPLY A DRAWING FILE THAT WILL BE THE "PLAN" VIEW OF YOUR PROJECT. YOU WILL WANT TO USE A DRAWING NAME THAT HAS NOT YET BEEN CREATED. TO CREATE A NEW DRAWING FILE YOU MUST TYPE THE LOCATION AND NAME OF THE FILE TO BE CREATED. IT IS STRONGLY RECOMMENDED THAT EACH PROJECT THAT YOU ADD TO EAGLE POINT BE IN IT'S OWN UNIQUE DIRECTORY. TYPE C:\ PROJECTS\ PROJECT NAME\ PROJECT NAME.DWG AND PRESS THE TAB KEY.

6. THE CONTENTS WITHIN A PROTOTYPE SETTINGS DESCRIPTION ALLOW YOU TO SET ITEMS SUCH AS UNITS, SCALES , TEXT HEIGHTS, ECT. FOR PROTOTYPE DRAWING YOU ARE SPECIFIYING THE DRAWING FILE THAT CONTAINS ANY PROTOTYPE SETTINGS FOR THE PROJECT DRAWING. YOU CAN USE THIS OPTION TO INDICATE A DRAWING THAT HAS BEEN PREDEFINED TO CONTAIN ANY OF YOUR ORGANIZATION"S STANDARDS. FOR PROTOTYPE SETTINGS, SELECT EITHER A PROTOTYPE NRCS , OR A PROTOTYPE THAT YOU HAVE DEVELOPED, OR EAGLE POINT FEET DEFAULT.

7. VERIFY THE LINEAR UNITS IS SET TO FEET.

8. LEAVE THE PROTOTYPE DRAWING FIELD ALONE. IT IS BASICALLY AUTOMATIC FROM WHAT YOU TYPED IN FOR YOUR PROTOTYPE SETTINGS. YOU CAN CHANGE ANY SETTINGS LATER ,IF YOU NEED TO CHANGE THEM.

9. CLICK ON THE ADVANCED BUTTON. NOW YOU WILL SPECIFY MULTIPLE DOCUMENT LOCATIONS. NEW IN EAGLE POINT IS THE ABILITY TO SEPARATE THE FILE OF A PROJECT TO DISTINCT LOCATIONS. THIS CAN BE USEFUL IF YOU WOULD LIKE TO DIRECT A PROJECT FILES TO A LOCATION WHERE CERTAIN PEOPLE CAN ACCESS THEM. SPECIFYING DATA\PLOT FILE LOCATIONS IS TYPICALLY PERFORMED AS A NEW PROJECT IS ENTERED INTO EAGLE POINT. BY DEFAULT, EAGLE POINT STORES ALL FILES THAT COMPRISE A PROJECT IN THE SAME DIRECTORY AS THE MAIN PROJECT DRAWING; BY DOING THIS EAGLE POINT VIEWERS CAN EASILY SHARE THEIR DRAWINGS WITH ONE AND ANOTHER.

10. DATA FILE LOCATION IS WHERE THE DATA FILES FOR THE PROJECT ARE TO BE STORED. TYPE C:\PROJECTS\PROJECT NAME\DATA. PRESS THE TAB KEY.

11. PLOT FILE LOCATION IS THE LOCATION WHERE YOU WANT TO KEEP THE PLOT FILES. TYPE C:\PROJECTS\PROJECT NAME\PLOT . CLICK OK.

12. WHENEVER YOU SPECIFY A DIRECTORY THAT HAS NOT YET BEEN CREATED, EAGLE POINT WILL ASK YOU IF YOU WANT TO CREATE IT. CLICK YES.

13. CLICK FINISH IN THE NEW PROJECT DIALOG BOX. CLICK OK IN THE OPEN DIALOG BOX..

14. USING YOUR MOUSE, EXPAND THE EAGLE POINT - FILE NAME DIALOG BOX IN THE UPPER LEFT CORNER. SELECT FILE, SELECT PRINT SETUP, MAKE SURE PRINTER IS SELECTED, AND NOT FILE, CLICK OK.

15. SPECIFYING PROJECT SETTINGS. THESE SETTINGS SHOULD BE ESTABLISH BEFORE YOU BEGIN YOUR DESIGN/ ANALYSIS WORK, AND BEFORE YOU LOAD YOUR POINTS FILE. SETTING UP A PROTOTYPE IN THE FUTURE TO USE WILL TAKE CARE OF THESE SETTINGS.

16. IF YOU SELECTED A NRCS PROTOTYPE OR YOUR OWN PROTOTYPE, JUMP TO STEP 27. IF YOU USED A EAGLE POINT PROTOTYPE OR KNOW THAT YOU WILL NEED TO CHANGE SOME SETTINGS, CONTINUE WITH STEP 17.

17. SELECT SYSTEM ( NEXT TO FILES IN THE EAGLE PIONT DIALOG BOX) .

18. FIRST SPECIFY THE PROJECT UNITS. SELECT UNITS. CLICK ON THE CATEGORY DROP LIST ARROW. VERIFY THAT CATEGORY IS SET TO ANGULAR , AND THAT INPUT AND OUTPUT ARE SET TO DEGREES, MINUTES, AND SECONDS. CLICK ON APPLY.

19. CLICK ON THE CATEGORY DROP LIST ARROW. HILIGHT DEGREE OF CURVATURE. CLICK ON INPUT/OUTPOUT LIST. SELECT THE ARC DEFINITION. VERIFY THAT THE LENGTH IS SET TO 100. CLICK APPLY.

20. CLICK ON THE CATEGORY DROP LIST ARROW. HILIGHT LINEAR. CHECK TO SEE THAT INPUT AND OUTPUT ARE IN FEET. CLICK APPLY.

21. CLICK ON THE CATEGORY DROP LIST ARROW. HILIGHT PLANIMETRIC AREA. CLICK ON INPUT/OUTPOUT LIST. CHECK TO SEE THAT INPUT AND OUTPUT ARE IN SQUARE FEET. CLICK APPLY. CLICK OK.

22. SELECT SYSTEM. SELECT FORMATS. IN THE FORMAT BOX ARROW THE CATEGORY TO HORIZONTAL DIRECTION. SET FORMAT TO NORTH AZIMUTH. CLICK APPLY.

23. ARROW CATEGORY TO NODES. CHECK POINT NUMBER PROTECTION, ID FORMAT SHOULD BE NUMERIC, CLICK APPLY

24. CLICK ON THE CATEGORY DROP LIST AND SELECT STATIONING. VERIFY THAT STATIONING IS SET TO +00, CLICK APPLY, CLICK OK..

25. SELECT SYSTEM. SELECT PRECISION. VERIFY THAT CATEGORY IS SET TO ANGULAR AND DEGREES MINUTES SECONDS IS SET TO THE NEAREST SECOND, CLICK APPLY

26. CLICK ON THE DROP CATEGORY LIST AND SELECT LINEAR. VERIFY THAT THE DISTANCE PRECICION IS 2. TYPE 2 FOR NORTHING AND EASTING AND 2 FOR ELEVATION. USE THE TAB KEY TO GET AROUND. CLICK APPLY AND OK.

27. ON THE EAGLE POINT MAIN MENU SELECT TOOLS, SELECT PLOT SCALES AND SET YOUR HORIZONTAL SCALE. LEAVE THE VERTICAL SCALE ALONE FOR NOW. CLICK OK.

28. FOR EAGLE POINT PROTOTYPE , IN THE EAGLE POINT BOX SELECT SYSTEM, SELECT NODE LIBRARY, ON CURRENT FIELD CODE ARROW TO EP DEFAULT SYMBOLS, SELECT 32 DOT, UNCHECK PLACE ADDITIONAL SYSMBOL, CLICK AND CLOSE. CLICK CLOSE ON THE NEXT DIALOG BOX.

FOR NRCS PROTOTYPE, IN THE EAGLE POINT BOX SELECT SYSTEM, SELECT NODE LIBRARY, ON

CURRENT FIELD CODE LIBRARY IT SHOULD SAY NRCS, IF IT DOES NOT, ARROW TO NRCS. UNDER

FIELD CODE HILIGHT G, SELECT THE SECOND ICON FROM THE LEFT ( MODIFY FIELD CODE ). THERE

ARE PROBABLY MANY WAYS TO APPROACH WANT WE NEED, THE FOLLOWING WILL WORK FOR EACH

LINE: G G DOT 1.00000000 V.Fcod.Misc 3 - Green Symbol and Point Topo Include

UNCHECK PLACE ADDITIONAL SYMBOL, CHECK USING FIELD CODES LAYER AND COLOR ,

UNCHECK USE FIELD CODE AS LINE IN AS DATA COLLECTION. CLICK APPLY, CLICK CLOSE.

29. SELECT PRODUCTS, DATA TRANSFER ON EAGLE POINT TOOLBAR. DATA TRANSFER DIALOG BOX COMES UP, SELECT TRANSFER..

30. SELECT SETTINGS, TRANSFER SETTINGS DIALOG BOX COMES UP, UNDER THE IMPORT TAB UNCHECK DRAW LINES, CHECK PLACE POINTS AS.

31. ARROW TO NODES, ARROW DEFAULT FIELD CODE TO 32 DOT OR G FOR NRCS PROTOTYPE.

32. NODE NUMBER TO ADD SHOULD BE ZERO. STARTING ID SHOULD BE ONE.

33. PLACE A CHECK ON USE POINT NUMBERS, PLACE A CHECK ON USE ELEVATIONS.

34. CLICK APPLY, CLICK OK.

35. SELECT TRANSFER, IMPORT FILE. A IMPORT FILE DIALOG BOX COMES UP.

36. USE THE OPEN FILE ICON ON THE RIGHT SIDE TO SELECT THE FILE YOU WANT. IT MAY BE ON A DISK OR IN A FILE YOU HAVE SET UP IN THE COMPUTER.

37. LEAVE THE FORMAT IN ABACUS SDC71. CLICK OK

38. A REPORT WARNINGS DIALOG BOX COMES UP. THE REPORT SHOULD STATE THE NUMBER OF NODES IMPORTED. PRINT IF YOU WISH, AND CLICK CLOSE.

39. LEAVE THE DATA TRANSFER BOX ACTIVE. YOUR POINTS FILE SHOULD HAVE LOADED INTO YOUR DRAWING. TO SEE THE POINTS, ELEVS. DESCRIPTIONS USE THE ZOOM EXTENTS ICON.

40. FROM THE DATA TRANSFER DIALOG BOX, SELECT REPORTS, AND NODES.

41. A REPORT NODES DIALOG BOX COMES UP, PLACE A DOT IN SELECT, ARROW TO ALL IN SELECTION METHOD.

42. CLICK APPLY, CLICK CLOSE.

43. A NODE REPORT BOX SHOULD COME UP, CLICK THE PRINT ICON AT THE BOTTOM RIGHT.

44. CHECK OFF THE FIRST 5 ITEMS ON THE LEFT AND HIT PRINT.

45. CLOSE THE DATA TRANSFER BOX.

46. SAVE YOUR DRAWING AS POINTS.

PLOTTING THE POINTS DRAWING

HIT THE F1 KEY FOR HELP IN EP-ACAD ( YOU MAY NEED TO CLICK ON THE EAGLE POINT

TOOL BAR FIRST).

BEFORE YOU PLOT THE DRAWING YOU MAY WISH TO SET UP YOUR POINT NUMBERS, ELEVATIONS AND DESCRIPTIONS SO THAT YOU WILL BE ABLE TO READ THEM. SOME MAY BE ON TOP OF EACH OTHER AT THIS TIME.

TO CHANGE THE SIZE OF THE ELEVATION, POINT NUMBER AND DESCRIPTION OF THE POINTS IN THE DRAWING IN ORDER TO BETTER READ EACH POINT, USE THE FOLLOWING STEPS:

PICK EP, PICK COGO, PICK NODES, PICK RESIZE, A RESIZE NODES DIALOG BOX COMES UP. CHECK SELECT FOR SELECTION METHOD. ARROW TO ALL FOR SELECTION METHOD. CLICK ON APPLY. THE BOX SHOULD REAPPEAR WITH THE NUMBER OF NODES SELECTED. CLICK ON NEXT. PLACE A DOT IN SCALE ATTRIBUTES AND TYPE IN A VALUE SUCH AS O.5 AND CLICK APPLY.

IF YOUR TEXT IS A SMALL AS YOU POSSIBLY WANT TO PLOT, AND YOU STILL HAVE TEXT ON TEXT, YOU MAY USE SWIVLE TO ROTATE THE TEXT TO CLEAN UP THE DRAWING SOMEWHAT.

PICK EP, PICK COGO, PICK NODES, PICK SWIVEL, A SWIVEL NODES DIALOG BOX COMES UP. SET SELECTION MODE TO SELECT, SET SELECTION METHOD TO AUTOCAD, CLICK ON THE NODE NUMBER (ID) YOU WISH TO MODIFY ON THE SCREEN ( NOT THE DOT ) AND HIT ENTER. THE SWIVEL NODES DIALOG BOX COMES BACK UP. CLICK ON NEXT AND TYPE IN THE ANGLE AND CLICK ON APPLY. TYPE IN THE DEGREES OF ROTATION AND HIT ENTER. THE ID'S OF THE NODES YOU HAVE SELECTED SHOULD APPEAR. CLICK APPLY. IF YOU WISH TO LEAVE THE SWIVEL NOTES COMMAND SO THAT YOU CAN SELECT NODES WITH THE MOUSE, CLICK CLOSE. IF YOU WANT THE DIALOG BOX TO COME UP FIRST, CLICK REPEAT, CHANGE THE SELECTION METHOD TO ALL AND CLICK CLOSE.

ROTATE FUNCTION IN THE SAME MENU ALSO WILL WORK, BUT IF YOU DO NOT CHOOSE THE BASE POINT AS THE NODE THAT YOU ARE ROTATING, YOU WILL ALSO ROTATE THE POINT. WHILE SWIVEL TAKES A LITTLE LONGER TO USE, YOU ARE NOT GOING TO MESS UP YOUR SURVEY AS YOU POSSIBLY CAN WITH ROTATE.

1. HAVE YOUR POINTS DRAWING ON THE SCREEN. AT THIS TIME YOU WISH TO CALCULATE THE

ACTUAL LENGTH OF THE PROJECT TO SET THE SCALE FOR THE BORDER THAT YOU PLAN TO USE, OR

JUST WAIT TILL STEP 6.

2. PICK EP ( UPPER COMMAND BAR) PICK DRAFTING.

3. PICK INSERT, PICK BORDER .

4. PICK HORIZONTAL OR VERTCAL ( DEPENDING ON WHICH WAY YOU WANT YOUR DRAWING

ORINTATING ) USE THE ARROW TO GET WHAT YOU WANT 22” BY 34” FOR E SIZE DRAWINGS,

8.5” BY 11” FOR L SIZE DRAWINGS, 11” BY 17” FOR N SIZE DRAWINGS

5. PIC OK, USE THE MOUSE TO PLACE THE BORDER AROUND YOUR DRAWING. YOU MAY USE THE

MOVE COMMAND UNDER MODIFY TO THE LEFT OF EP TO POSITION YOUR BORDER. YOU MAY ALSO

USE THE UNDO ARROW AND START AGAIN.

6. IF YOUR DRAWING DOES NOT MATCH THE SHEET SIZE THAT YOU WANT, YOU WILL HAVE TO CHANGE

THE SCALE OF THE DRAWING. ( IN THE EAGLE POINT - FILE NAME DIALOG BOX , SELECT TOOLS,

SELECT PLOT SCALES, CHANGE THE HORIZONTAL SCALE , THIS IS A TRIAL AND ERROR PROCESS )

7. PICK INSERT, PICK BAR SCALE , TO PLACE A SCALE UNDER THE DRAWING. A INSERT DIALOG BOX

COMES UP. CLICK ON INSERT TO PLACE THE BAR SCALE, OR MODIFY TO YOUR WISHES AND THEN

INSERT THE SCALE.

8. PICK INSERT, PICK ARROWHEAD , SELECT ARROW 3 ON SYMBOL, UNCHECK ALIGN TO OBJECT,

TYPE IN 20 OR WHATEVER WORKS FOR YOU IN THE SCALE FACTOR . IF NORTH IS TOWARDS THE

TOP OF THE DRAWING, TYPE IN 90 FOR ROTATION,. CLICK ON INSERT TO PLACE A NORTH ARROW.

9. AT THIS POINT YOU MAY WISH TO ADJUST THE BAR SCALE, NORTH ARROW, OR THE BORDER,

PICK MODIFY, PICK MOVE, FOLLOW THE INSTRUCTIONS NEAR THE BOTTOM OF THE SCREEN.

AT THIS POINT YOU MAY WISH TO ENTER TEXT IN THE TITLE BLOCK (IF YOU DO NOT WISH TO ENTER TEXT, JUMP TO STEP 17). THERE ARE MANY WAYS TO ENTER TEXT. ONE OF THE EASIEST TO LEARN IS AS FOLLOWS:

10. PICK DRAW TO THE LEFT OF EP IN THE AUTOCAD SECTION.

11. PICK TEXT, PICK SINGLE LINE TEXT.

12. AT THE BOTTOM YOU WILL BE PROMPTED FOR START POINT. USE THE MOUSE TO PICK THE START

POINT FOR THE TEXT.

13. YOU WILL BE PROMPTED FOR THE SIZE OF TEXT. THE SIZE DEPENDS ON THE SCALE YOU ARE IN (15

TO 60 WORKS).

14. YOU WILL BE PROMPTED FOR ROTATATION ANGLE. ROTATION SHOULD BE 90 FOR SIDE BORDERS

OR VERTICAL TEXT. ROTATION SHOULD BE 0 FOR HORIZONTAL TEXT.

15. YOU WILL BE PROMPTED FOR TEXT, TYPE THE TEXT THAT YOU WANT AND ENTER.

16. IF WHAT YOU HAVE FOR TEXT ON THE DRAWING IS NOT WHAT YOU WANT,

PICK MODIFY AT THE TOP, PICK ERASE, CLICK ON THE WORDS AND HIT ENTER TO ERASE.

THEN TRY THE STEPS AGAIN STARTING WITH STEP 11.

PRINTING OR PLOTTING THE DRAWING

17. PICK FILE, PICK PAGE SETUP. A PAGE SETUP DIALOG BOX COMES UP.

18. SELECT THE PLOT DEVICE TAB. ARROW TO THE PRINTER OR PLOTTER NAME THAT YOU WANT.

19. SELECT THE LAYOUT SETTINGS TAB. USE THE DROP ARROW TO SELECT THE PAPER SIZE, SUCH AS

TABLOID FOR THE 2500 PRINTER.

20. SELECT THE DRAWING ORIENTATION.

20. IN PLOT SCALE SECTION, . SET THE SCALE TO THE SCALE THAT YOUR DRAWING IS SET TO BY

TYPING IN THE SCALE.

22. PICK OK.

23. SELECT FILE, SELECT PLOT. A PLOT DIALOG BOX COMES UP. CHECK TO SEE THAT ALL INFORMATION IS CORRECT.

24. SELECT THE WINDOW BUTTON. WINDOW A RECTANGLE AROUND YOUR DRAWING. PREFERABLY JUST INSIDE THE CORNER TABS OUTSIDE OF THE BORDER.

25. SELECT PARTIAL PREVIEW, CHECK TO SEE IF THERE ARE ANY ERRORS.

26. SELECT FULL PREVIEW. ALLOW A FEW SECONDS FOR THE PREVIEW OF THE

DRAWING TO COME UP.

DOES THE DRAWING LOOK OK ? ( THIS PART IS A TRIAL AND ERROR PROCESS, YOU MUST MAINLY

PRACTICE TO MATCH THE WINDOW WITH THE FINAL PLOT THAT YOU WANT).

HIT THE ENTER KEY TO EXIT THE PREVIEW.

27. PICK OK. THE DRAWING SHOULD BE PLOTTED.

CHECK THE SCALE AFTER IT IS PLOTTED.

28. PICK FILE, PICK SAVE AS, SAVE YOUR DRAWING, CALL IT POINTS OR POINTS1.

STATIONING A LINE WITH OR WITHOUT CROSS SECTIONS -- STATION OFFSET

( THIS IS THE FASTEST METHOD, IF YOU CAN EASILY DETERMINE THE CL POINTS TO CLICK ON , ON THE SCREEN; IF YOU CAN’T, USE THE NEXT METHOD )

TO CHANGE THE SIZE OF THE ELEVATION, POINT NUMBER AND DESCRIPTION OF THE POINTS ON THE SCREEN IN ORDER TO BETTER READ EACH POINT, USE THE FOLLOWING STEPS:

IF YOU STILL HAVE TEXT ON TEXT, YOU MAY USE SWIVLE TO ROTATE THE NODE TEXT TO CLEAN UP THE SCREEN DRAWING SOMEWHAT.

1. PUT YOUR POINTS DRAWING ON THE SCREEN.

2. MAKE SURE THE RUNNING OBJECT SNAP IS ON FOR SNAP TO NODES. PICK EP AND AUTOCAD,

PICK OPTIONS, PICK RUNNING OBJECT SNAP, CLICK ON APPLY, CLICK ON OK.

3. SNAP TO NODE AND TO NEAREST MUST BE ON. PICK EP, PICK AUTO CAD, PICK TOOLS, PICK

DRAFTING PICK SETTINGS, PICK OBJECT SNAP ON, CENTER CHECKED, NODE CHECKED,

NEAREST CHECKED.

4. ARROW AND ZOOM TO START NODE FOR STATIONING. PICK DRAW, PICK 3D POLYLINE,

5. NOTICE THE STATEMENT UNDER THE COMMAND LINE. CLICK FROM NODE TO NODE WITH THE

MOUSE STARTING FROM THE BEGINNING OF THE LINE YOU WISH TO STATIONWHEN YOU HAVE

FINISHED, HIT THE ENTER KEY.

3. PICK EP, PICK COGO.

4. PICK LAYOUT, PICK CONVERT OBJECTS TO ALIGNMENT, LEFT CLICK ON THE LINE FOR SELECTED ALIGNMENT, HIT ENTER.

5. THE COMMAND LINE WILL ASK YOU TO PICK POINT NEAR THE BEGINNING OF THE ALIGNMENT.

6. A CONVERT OBJECTS TO ALIGNMENT DIALOG BOX APPEARS. GIVE THE ALIGNMENT A NAME SUCH AS CL.

7. FILL IN THE BEGINNING STATION, SUCH AS 0+00 OR 10+00. CLICK APPLY, THE DIALOG BOX WILL DISAPPEAR.

8. PICK REPORT, PICK STATION/OFFSET. A REPORT STATION/ OFFSET DIALOG BOX SHOULD COME UP.

9. HILIGHT THE NAME OF YOUR ALIGNMENT AND CLICK NEXT.

10. ANOTHER REPORT STATION/OFFSET BOX COMES UP. PICK SELECTION MODE SELECT, SELECTION METHOD ALL, CHECK LEFT AND RIGHT, FILL IN THE DISTANCE YOU WANT TO REACH OUT ON SECTIONS. CLICK APPLY.

11. CLICK CLOSE ON THE NEXT STATION/OFFSET BOX..

12. A REPORT STATION/OFFSET DIALOG BOX SHOULD COME UP.

13. CLICK ON PRINT ICON IN THE BOTTOM LEFT CORNER . A STATION OFFSET PRINT OPTIONS DIALOG BOX SHOULD COME UP.

14. CHECK OFF ID, ELEVATION, DESCRIPTION, STATION, AND OFFSET AS A MINIMUM.

15. CLICK THE PRINT BUTTON FOR OUTPUT. CLOSE THE BOX IF YOU WISH, AFTER YOU ARE SURE YOU HAVE A PRINTOUT.

EACH NODE THAT HAS A ZERO VALUE FOR OFFSET IS A CENTERLINE POINT. THE PROGRAM

WILL REACH TO ANY POINTS THAT ARE PERPINDICULAR TO THE CENTERLINE OUT TO THE

DISTANCE YOU REQUESTED.

THE OFFSET SHOTS THAT APPEAR TO BE FAIRLY PERPINDICULAR TO THE CENTERLINE NODE WILL

STILL NOT HAVE THE EXACT STATIONING AS THE CENTERLINE NODE. FOR THE WATERWAY

PROGRAM THE STATIONING OF OFFSET SHOTS SHOULD BE CHANGED TO THE CENTERLINE NODE

STATIONING UNLESS THE SHOTS ARE WAY OFF FROM PERPINDICULAR WITH THE CENTERLINE

STATION. ( THE SHOTS THAT ARE USED IN A LASER LEVEL SURVEY ARE NOT PERFECTLY

PERPINDICULAR TO THE CENTERLINE .)

THERE IS SMALL SEGMENT ON THE OUTSIDE OF ANY CURVE ON A PROFILE THAT IS NOT

PERPINDICULAR TO EITHER LINE AT THE CENTERLINE NODE. THE PRINTOUT WILL SHOW THESE

SHOTS OR NODES AS N/A.

TO GET THE DISTANCE TO THESE POINTS FOR SECTIONS, TYPE IN DIST IN THE COMMAND

SECTION. CLICK ON THE TWO POINTS AND HIT ENTER.

NOTE: ORTHO MUST BE TURNED OFF. ( BUTTON BELOW COMMAND LINE)

SNAP TO NODE AND TO NEAREST MUST BE ON. ( EP, AUTO CAD, TOOLS, DRAFTING

SETTINGS, OBJECT SNAP ON, CENTER CHECKED, NODE CHECKED, NEAREST CHECKED. )

STATIONING A LINE WITH OR WITHOUT CROSS SECTIONS -- STATION OFFSET

( USING POINT NUMBERS TO MAKE THE LINE )

1. IF ALL THE CENTERLINE POINTS THAT YOU WANT TO STATION HAVE BEEN CODED, AND ARE IN

CONSECUTIVE ORDER, SKIP PART TWO.

2. USING THE POINTS DRAWING AND THE POINTS LIST, MAKE A LIST ON THE SIDE OF THE POINTS IN THE ORDER THAT YOU WOULD LIKE TO HAVE THEM STATIONED. IF POINTS ARE ON TOP OF EACH OTHER YOU SHOULD BE ABLE TO USE THE DESCRIPTIONS IN THE POINTS FILE TO DETERMINE WHICH POINT YOU WANT. YOU CAN ALSO CLICK ON A DESCRIPTION ON THE SCREEN TO HILIGHT IT, AND TELL WHICH POINT NUMBER IT IS, AND JUST WHERE THE NODE IS.

ANOTHER METHOD THAT MAY HELP IS TO RESIZE THE NODES TEXT TO A MUCH SMALLER SIZE ON

THE SCREEN. SEE THE NEXT TWO PARAGRAPHS.

TO CHANGE THE SIZE OF THE ELEVATION, POINT NUMBER AND DESCRIPTION OF THE POINTS ON THE SCREEN IN ORDER TO BETTER READ EACH POINT, USE THE FOLLOWING STEPS:

IF YOU STILL HAVE TEXT ON TEXT, YOU MAY USE SWIVLE TO ROTATE THE NODE TEXT TO CLEAN UP THE SCREEN DRAWING SOMEWHAT.

3. PUT YOUR POINTS DRAWING ON THE SCREEN.

4. MAKE SURE THAT THE RUNNING OBJECT SNAP TO NODES IS ON. PICK EP AND AUTOCAD, PICK TOOLS, PICK OPTIONS, PICK USER PREF., PICK RUNNING OBJECT SNAP, CLICK APPLY, CLICK OK.

5. SNAP TO NODE AND TO NEAREST MUST BE ON. PICK EP, PICK AUTO CAD, PICK TOOLS, PICK DRAFTING PICK SETTINGS, PICK OBJECT SNAP ON, CENTER CHECKED, NODE CHECKED, NEAREST CHECKED.

6. PICK EP, PROFILES, SETUP, AND PROFILE COORDINATE SYSTEM. A DIALOG BOX APPEARS ON THE SCREEN

7. CLICK ON NEW ( ICON AT BOTTOM LEFT ) , A NEW PROFILE COORDINATED SYSTEM DIALOG BOX APPEARS. TYPE IN A NAME, SUCH AS CL.

8. HIT PICK BUTTON ON TOP RIGHT, NOTE THE COMMAND LINE AT THE BOTTOM OF THE SCREEN. CLICK OFF TO THE SIDE FOR A BASE POINT, NEAR WHERE THE STATIONING WILL START, BUT NOT IN THE AREA TO BE STATIONED. THE X AND Y COORDINATES SHOULD AUTOMATICALLY FILL IN THE BLANKS.

9. CLICK ON STATION AND ELEVATION AND TYPE ZERO FOR EACH. CHECK LEFT TO RIGHT THEN PICK OK. PICK CLOSE.

10. PICK EP, PICK COGO, PICK CONSTRUCT, PICK THROUGH NODES.

11. A CONSTRUCT THROUGH NODES DIALOG BOX COMES UP, LEAVE IN THE LINE BY LINE END PTS IN THE TOP BLANK OR USE THE ARROW TO GET LINE BY LINE END PTS. IN THE BLANK. AT THE BOTTOM OF THE BOX ARROW TO 3D.

12. TYPE IN EACH POINT NUMBER, ENTER AFTER EACH END OF LINE POINT NUMBER. START WITH THE POINT NUMBER THAT YOU WISH TO MAKE AS 0+00 AND ENTER IN CONSECUTIVE ORDER, PICK APPLY, PICK CLOSE.

13. ZOOM IN AND CHECK THE 3D LINE TO SEE IF IT CATCHES THE POINTS THAT YOU WANT AS THE CL.

14. PICK EP, PICK COGO, PICK LAYOUTS ( THE MENU MAY BE SETUP AT THE TIME TO JUST PICK LAYOUT ).

15. PICK CONVERT OBJECTS TO ALIGNMENTS. CHECK THE COMMAND LINE AT THE BOTTOM OF THE SCREEN.

16. USE THE MOUSE TO CLICK ON THE LINE (ALL SEGMENTS SHOULD BE DASHED AFTER CLICKING ON IT AND THE COMMAND LINE SHOULD SAY 1 OBJECT FOUND). USE ENTER IF THE LINE IS DASHED.

17. PICK A POINT NEAR THE BEGINNING OF THE LINE . ( COMMAND LINE STATEMENT)

18. THE CONVERT OBJECTS DIALOG BOX COMES UP. TYPE IN THE NAME YOU GAVE YOUR LINE FROM STEP 6.

19. CHECK THE BEGINNING STATION TO BE SURE IT WHAT YOU WANT SUCH AS 0+00 OR 10+00. PICK APPLY. THE DIALOG BOX SHOULD DISAPPEAR.

20. PICK REPORT, PICK STATION OFFSET. A REPORT STATION/OFFSET DIALOG BOX SHOULD COME UP.

21. HILIGHT THE ALIGNMENT NAME THAT YOU WANT. PICK NEXT > ANOTHER REPORT STATION/OFFSET BOX COMES UP.

22. CHECK SELECT , CHECK ALL, CHECK LEFT AND RIGHT AND RIGHT , AND TYPE IN THE DISTANCE THAT YOU WANT YOUR CROSS SECTIONS TO REACH OUT TO. (EXAMPLE 40 FT.)

23. PICK APPLY , PICK CLOSE.

24. A REPORT STATION/OFFSET DIALOG BOX SHOULD COME UP.

25. CLICK ON PRINT ICON IN THE BOTTOM LEFT CORNER . A STATION OFFSET PRINT OPTIONS DIALOG BOX SHOULD COME UP.

26. CHECK OFF ID, ELEVATION, DESCRIPTION, STATION, AND OFFSET AS A MINIMUM.

27. CLICK THE PRINT BUTTON FOR OUTPUT. CLOSE THE BOX IF YOU WISH.

28. EACH NODE THAT HAS A ZERO VALUE FOR OFFSET IS A CENTERLINE POINT. THE PROGRAM WILL REACH TO ANY POINTS THAT ARE PERPINDICULAR TO THE CENTERLINE OUT TO THE DISTANCE YOU REQUESTED.